Preparation

• Shower first to remove sweat, body oils, deodorant, lotions, and fragrances.
• Avoid oils, lotions & creams — they can degrade latex and leave residue on PVC.
• Ensure your skin is fully dry — humidity increases friction and makes latex cling.

Latex

• Use a silicone-based dressing aid for easier dressing in humidity. (from beGLOSS or Vivishine).
• Take care with fingernails and long nails — use the flats of your fingers or smooth gloves.
• Remove accessories (rings, bracelets, watches) to avoid snags.
• Go slow — ease the garment into place without sharp pulls.
• Let latex warm to room temperature before wearing.

PVC

• No dressing aid needed, though PVC may cling slightly in humidity.
• Be gentle with seams — warm PVC softens and can crease.
• Consider a thin breathable base layer for comfort in heat.

Latex

• Hand wash after every wear, especially in warm climates.
• Use two separate plastic buckets:
  
  - Bucket 1: Lukewarm water + mild soap or a latex-safe cleaner (from beGLOSS or Vivishine).
  
  - Bucket 2: Clean lukewarm water for rinsing.
  
• Avoid washing in sinks (especially metal or dirty sinks).
• Rinse thoroughly in the clean bucket.
• Dry completely in a cool, shaded, well‑ventilated area (fans / A/C help prevent mold).

PVC

• Wipe down after each wear to remove sweat and help prevent odor.
• For a deeper clean, use the two‑bucket method:
  
  - Bucket 1: Cool water + PVC-safe cleaner (from beGLOSS or Vivishine).
  
  - Bucket 2: Clean cool water for rinsing.
  
• Avoid washing in sinks, especially metal or heavily used sinks.
• Dry in a ventilated, shaded space, away from direct heat or sun.

• Polish only when fully dry — trapped moisture can cause cloudiness.
• Use silicone‑based latex shine products such as those from Vivishine or beGLOSS (follow each brand’s directions).
• Avoid all oil-based products — they degrade latex.

Latex

• Store in a cool space, ideally air‑conditioned.
• Avoid sunlight and heat, which weaken and discolor latex.
• Never hang on metal hangers or metal clothes airers.
  If metal must be used, place a barrier (acid‑free tissue, fabric, or plastic).
  
• Prefer padded or plastic hangers.
• Do not mix colours.
  
  Light/pastel latex can absorb pigment from darker pieces.
• Use acid‑free tissue paper between layers so latex doesn’t touch itself.
• Do not store latex and PVC together.
  PVC plasticizers can damage latex.
  
• Use unscented talcum powder (from beGLOSS or Vivishine) for matte latex or for long‑term storage.

Short‑Term Storage: Shine‑Rinse Method

After cleaning and rinsing, add a small amount of silicone-based latex shine (from beGLOSS or Vivishine) to a basin of lukewarm water. Swirl the garment through to leave a light, even protective layer before drying and storing.

Latex

• Wipe sweat from the inside immediately after wear.
• Bring a small silicone dressing aid + soft cloth for adjustments.
• Consider bringing a small bottle or sachets of latex shine with you if you need to top up your shine during wear.
• Avoid leaving latex in hot cars or near windows.

PVC

• Wipe sweat to help prevent odor.
• A breathable liner can improve comfort.
• Avoid very warm surfaces — PVC softens quickly.

General Tip (Applies to BOTH Latex & PVC)

• A dry box or dry cabinet can help reduce moisture and prevent mold.
• Always store latex and PVC separately to avoid chemical transfer, especially in humid environments.

Each manufacturer has its own instructions - please follow product labels and usage guidance.